Handlebar risers for Kawasaki Versys 650

Handlebar risers for Kawasaki Versys 650

Rs. 6,400.00
Inclusive of all taxes
Only 2 left in stock

IBEX – Handlebar Riser The IBEX handlebar riser makes riding more comfortable by raising the handlebars to create a relaxed, upright seating position. This reduces strain on the back, shoulders, and arms while improving visibility and overall bike control. The...

Product details

IBEX – Handlebar Riser

The IBEX handlebar riser makes riding more comfortable by raising the handlebars to create a relaxed, upright seating position. This reduces strain on the back, shoulders, and arms while improving visibility and overall bike control. The result is better handling, a more direct riding feel, and fatigue-free comfort whether you’re cruising on highways, navigating traffic, or riding off-road.

Key Benefits

  • Increases handlebar height by 39 MM
  • Promotes a relaxed, upright riding position
  • Reduces fatigue and improves comfort on long rides
  • Improve handling, control, and direct steering response
  • Allows easier standing riding off-road for better bike control

Technical Data

  • Height increase: 39 MM
  • Material: CNC-machined high-strength aluminum (no casting)
  • Finish: Anodized in silver
  • Installation: Direct fit, no cable extension required
  • Box contains: Pair of risers and Screws set

.

Questions riders ask about this part

They are made specifically for the Kawasaki Versys 650. Fitment can change between model years, so if you're unsure about yours, send Machina your bike's year and a photo on WhatsApp before ordering.
CNC-machined aluminium (no casting) with an anodised finish. Aluminium is strong for its weight and does not rust, so it copes with rain, mud and road spray.
The risers fit between the Kawasaki Versys 650's top clamp and the handlebar. After fitting, turn the bars lock to lock and check the throttle, clutch and brake lines — if anything pulls tight, reroute it before riding. Any mechanic can do this if you'd rather not.
Yes. Long Indian highway days, traffic and broken roads where you stand on the pegs all get easier when the bars are higher. You sit more upright and stand without hunching, which cuts back, shoulder and wrist fatigue.
Usually not for a moderate rise, but always check at full steering lock both ways. If any cable, hose or wire pulls tight, reroute it before riding. Machina can confirm for your exact bike on WhatsApp.
Complete the build

More for your VERSYS 650

See the KAWASAKI VERSYS 650 page

BIGFOOT™  The stock kick stand of most motorcycles has a small surface area, making your Versys 650 vulnerable to sinking into hot asphalt, muddy terrain, or loose ground. The side stand enlarger by MACHINA™ resolve this very confidently. BIGFOOT™ ( side stand...

PriceRs. 2,549.00Rs. 2,999.00
Buy now
Side stand extender

The rear fender extender for Versys 650 is designed to reduce mud, water, and debris spray from the rear wheel. It helps keep the suspension and frame cleaner during rides in wet or off-road conditions. Made for a precise fit, it installs easily...

PriceRs. 6,400.00
Buy now
Rear fender extender

PriceRs. 8,499.00
Buy now
Adventure foot pegs

PriceRs. 4,999.00
Buy now
Lowering link kit

The Versys 650's rear tyre throws water, mud and grit straight up at the shock, linkage and chain, and onto the underside of the tail. That grime wears the shock seal and keeps the chain dirty. The Machina rear tyre hugger sits...

PriceRs. 9,999.00
Buy now
Rear Tyre Hugger

Machina handguards for the Kawasaki Versys 650 and Versys 1000 protect your brake and clutch levers in a tip-over and keep flying stones, rain and cold air off your hands. The wide wind deflectors make a real difference on long highway days...

PriceRs. 7,999.00
Buy now
Handguards with Wind Deflectors

A direct bolt-on windshield upgrade for the Kawasaki Versys 650 and Versys 1000, designed to reduce wind fatigue on long rides. Manufactured from high-quality ABS plastic with a high-gloss finish for durability and a clean OEM-inspired look.SpecificationsMaterial: High-grade ABS PlasticFinish: High GlossColors:...

PriceRs. 7,200.00
Buy now
Windshield Windscreen

Precision-engineered adjustable clutch and brake levers designed for Kawasaki Z900, Z650RS, Versys 1000, Versys 650, and Vulcan 650 motorcycles. CNC machined from premium materials for durability and reliability. Customize lever reach and angle to match your riding style and hand size, ensuring...

PriceRs. 7,999.00
Buy now
Adjustable clutch and brake levers

PriceRs. 7,499.00
Buy now
Saddle stay

Machina Splash Guard – Kawasaki Versys 650 The Machina Splash Guard is designed to keep your Kawasaki Versys 650 cleaner and better protected during everyday rides and long-distance touring. Engineered to minimize water, mud, and debris spray from the rear wheel, it...

PriceRs. 6,499.00
Buy now
Splash guard